VCM-DAS-3 datasheet(8/42 Pages) ETC2

8 / 42 page

RoHS Compliance

VCM-DAS-3 Reference Manual

RoHS Compliance

The VCM-DAS-3 is RoHS-compliant.

ABOUT ROHS

In 2003, the European Union issued Directive 2002/95/EC regarding the Restriction of the use of

certain Hazardous Substances (RoHS) in electrical and electronic equipment.

The RoHS directive requires producers of electrical and electronic equipment to reduce to

acceptable levels the presence of six environmentally sensitive substances: lead, mercury,

cadmium, hexavalent chromium, and the presence of polybrominated biphenyls (PBB) and

polybrominated diphenyl ethers (PBDE) flame retardants, in certain electrical and electronic

products sold in the European Union (EU) beginning July 1, 2006.

VersaLogic Corporation is committed to supporting customers with high-quality products and

services meeting the European Union’s RoHS directive.

Warnings

ELECTROSTATIC DISCHARGE

Warning!

Electrostatic discharge (ESD) can damage circuit boards, disk drives and other

components. The circuit board must only be handled at an ESD workstation. If an

approved station is not available, some measure of protection can be provided by

wearing a grounded antistatic wrist strap. Keep all plastic away from the board, and

do not slide the board over any surface.

After removing the board from its protective wrapper, place the board on a

grounded, static-free surface, component side up. Use an antistatic foam pad if

available.

The board should also be protected inside a closed metallic anti-static envelope

during shipment or storage.

VCM-DAS-3 Datasheet(PDF) 8 Page - List of Unclassifed Manufacturers