ADSP-21062LABZ-160 datasheet(21/64 Pages) AD

21 / 64 page

ADSP-21060/ADSP-21060L/ADSP-21062/ADSP-21062L/ADSP-21060C/ADSP-21060LC

Rev. F

Page 21 of 64

March 2008

ESD CAUTION

PACKAGE MARKING INFORMATION

Figure 8 and Table 8 provide information on detail contained

within the package marking for the ADSP-2106x processors

(actual marking format may vary). For a complete listing of

product availability, see Ordering Guide on Page 61.

TIMING SPECIFICATIONS

The ADSP-2106x processors are available at maximum proces-

sor speeds of 33 MHz (–133), and 40 MHz (–160). The timing

specifications are based on a CLKIN frequency of 40 MHz

tCK = 25 ns). The DT derating factor enables the calculation for

timing specifications within the min to max range of the tCK

specification (see Table 9). DT is the difference between the der-

ated CLKIN period and a CLKIN period of 25 ns:

DT = tCK – 25 ns

Use the exact timing information given. Do not attempt to

derive parameters from the addition or subtraction of others.

While addition or subtraction would yield meaningful results

for an individual device, the values given in this data sheet

reflect statistical variations and worst cases. Consequently, you

cannot meaningfully add parameters to derive longer times.

For voltage reference levels, see Figure 28 on Page 47 under Test

Conditions.

Timing Requirements apply to signals that are controlled by cir-

cuitry external to the processor, such as the data input for a read

operation. Timing requirements guarantee that the processor

operates correctly with other devices. (O/D) = Open Drain,

(A/D) = Active Drive.

Switching Characteristics specify how the processor changes its

signals. You have no control over this timing—circuitry external

to the processor must be designed for compatibility with these

signal characteristics. Switching characteristics tell you what the

processor will do in a given circumstance. You can also use

switching characteristics to ensure that any timing requirement

of a device connected to the processor (such as memory) is

satisfied.

Figure 8. Typical Package Brand

Table 8. Package Brand Information

Brand Key

Field Description

Temperature Range

Package Type

Lead (Pb) Free Option

ccc

See Ordering Guide

vvvvvv.x

Assembly Lot Code

n.n

Silicon Revision

yyww

Date Code

ESD (electrostatic discharge) sensitive device.

Charged devices and circuit boards can discharge

without detection. Although this product features

patented or proprietary protection circuitry, damage

may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to

avoid performance degradation or loss of functionality.

vvvvvv.x n.n

tppZccc

ADSP-2106x

yyww country_of_origin

ADSP-21062LABZ-160 Datasheet(PDF) 21 Page - Analog Devices

ADSP-21062LABZ-160 Datasheet(HTML) 21 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL