Hardware kit

AN3972

8/21

Doc ID 022161 Rev 1

2.3

STEVAL-IHP001V3

The STEVAL-IHP001V3 ZigBee smartplug demonstration board employs the STM32F10x

microcontroller, ZigBee SPZB260-PRO module, and STPM01 energy metering IC to

implement a ZigBee meter node which allows the user to monitor and manage the energy

consumption of a connected load.

In a typical home system implementation, the board is plugged into an electrical wall socket,

and supplies a home appliance or other generic electrical load. Current, power, energy and

other information related to the electrical load connected to the smartplug board can be

shown on an LCD displayed locally, or sent to a ZigBee data concentrator through a

home/building ZigBee network.

While the STEVAL-IHP001V3 replaces the STEVAL-IHP001V2, the hardware for both the

V2 and V3 versions of the smartplug demonstration boards are identical. The STEVAL-

IHP001V3 differs from the V2 version only in terms of the ZigBee PRO stack update. More

information is available for downloading at www.st.com.