AN3972

Hardware kit

Doc ID 022161 Rev 1

5/21

2

Hardware kit

This section describes the hardware components necessary to set up the home web

console demo kit:

●

One STM3210C-EVAL board

●

One SPZB260-PRO module adapter board for the STM3210C-EVAL

●

Several ZigBee smartplug boards (STEVAL-IHP001V3).

2.1

STM3210C-EVAL demonstration board

The STM3210C-EVAL is a standard evaluation tool for the STM32F107xx microcontroller

which includes an embedded Ethernet controller; this is the main feature necessary for the

home web console. For further details about this board please refer to the UM0600 user

manual.

Figure 1.

STM3210C-EVAL demonstration board

The connectors CN8 and CN9, which include all the MCU pinouts, are used to connect the

SPZB260-PRO adapter, so a specific configuration of the board is necessary to free some

MCU I/O resources. The following is the board setup:

●

To close jumper JP19

●

To open jumper JP15

●

To remove R79, R84 and R169.

Table 2 shows the pinout mapping of the connectors over the adapter.