November 2011

Doc ID 022161 Rev 1

1/21

AN3972

Application note

Home web console for ZigBee® smartplugs

Introduction

This document describes how to use the STM3210C-EVAL, based on the STM32F107VC

The application can be used as a reference for the development of a ZigBee - TCP/IP

Networks Bridge and is an example on how, in a smartgrid scenario, the services offered by

a ZigBee HAN can be exported to the Internet by an Ethernet/Internet gateway.

The STM32F107VC coordinates the ZigBee network through an SPZB260-PRO module

included in an adapter connected by the expansion connectors of the STM3210C-EVAL; the

ZigBee network is built using several STEVAL-IHP001V3s used to monitor and control

several AC loads (lights, appliances, etc.) inside the HAN. The adapter also includes an

M24LR64-R dual interface EEPROM to store the TCP/IP network configuration. In fact, in

the microcontroller firmware, a web server is also implemented which allows to monitor the

AC load power consumption measured by each smartplug and to control its status

(ON/OFF).

www.st.com