STR91x demonstration software

Running the demonstrations

17/20

This sub-menu is used to configure the USB cell to communicate with the PC and run the

mouse demo using the joystick push-buttons.

If "SEL" pressed the following message is displayed on the LCD screen:

For this sub-menu you have to connect an USB cable between the USB connector type B

(CN3) and the PC. The previous message will remain displayed on the LCD screen until the

cable plugin.

Once the cable is connected, the following message is displayed on the LCD screen:

Move the joystick and the PC cursor will move corresponding to the joystick push-button.

To exit from this sub-menu press "SEL".

2.4.4

Webserver demo

The STR91x microcontroller provides a DMA/MAC controller for Ethernet communication.

This demo shows a webserver application, based on the uIP v0.9 TCP/IP stack.

The following sub-menu is used to start the Ethernet webserver demo:

If "SEL" is pressed the following message is displayed on the LCD screen:

Start

USB Mouse Demo

Plug the USB

Cable

Move the JoyStick

To Stop Press SEL

Start

Webserver Demo

Webserver Started

Press UP to exit