| Electronic Components Datasheet Search |
|
MCP2035-I/ST Datasheet(PDF) 5 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP2035-I/ST Datasheet(HTML) 5 Page - Microchip Technology |
|
5 / 68 page ![]() AC CHARACTERISTICS Electrical Specifications: Standard Operating Conditions (unless otherwise stated), Supply Voltage: 2.0V VDD 3.6V, Operating temperature: -40°C TA +85°C, LCCOM connected to VSS, LCX Input Signal: Sinusoidal 300 mVPP, Carrier Frequency = 125 kHz, Bits <3:1> of Configuration Register 0: LCXEN = 0, LCZEN = LCYEN = 1. Parameters Sym. Min. Typ(2) Max. Units Conditions Input Sensitivity VSENSE 13.0 6 mVPP VDD = 3.0V Output enable filter disabled AGCSIG = 0; MODMIN = 00 (33% modulation depth setting) Input = Continuous Wave (CW) Output = Logic level transition from low-to-high at sensitivity level for CW input. Coil de-Q’ing Voltage - RF Limiter (RFLM) must be active VDE_Q 3— 5 V VDD = 3.0V, Force IIN = 5 A (worst case) RF Limiter Turn-on Resistance at LCX pin RFLM — 300 700 Ω VDD = 2.0V, VIN = 8 VDC Sensitivity Reduction SADJ —0 — dB VDD = 3.0V No sensitivity reduction selected Maximum reduction selected Monotonic increment in attenuation value from setting = 0000 to 1111 by design —-30 — dB Minimum Modulation Depth 60% setting VIN_MOD — 60 84 % VDD = 3.0V See Section 5.20 “Minimum Modulation Depth Requirement for Input Signal” . See Modulation Depth Definition in Figure 5-5. 33% setting — 33 49 % 14% setting — 14 26 % 8% 8 % Carrier frequency FCARRIER — 125 — kHz Input modulation frequency FMOD — — 10 kHz Input data rate with NRZ data format. VDD = 3.0V Minimum modulation depth setting = 33% Input conditions: Amplitude = 300 mVPP Modulation depth = 100% Note 1: Parameter is characterized but not tested. 2: Data in “Typ.” column is at 3.0V, +25°C unless otherwise stated. These parameters are for design guidance only and are not tested. 3: Required output enable filter high time must account for input path analog delays (= TOEH - TDR + TDF). 4: Required output enable filter low time must account for input path analog delays (= TOEL + TDR - TDF). |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |