| Electronic Components Datasheet Search |
|
MCP2035-I/ST Datasheet(PDF) 56 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP2035-I/ST Datasheet(HTML) 56 Page - Microchip Technology |
|
56 / 68 page ![]() MCP2035 DS22304A-page 56 2012 Microchip Technology Inc. REGISTER 5-8: STATUS REGISTER 7 (ADDRESS: 0111) R-0 CHZACT bit 8 R-0 R-0 R-0 R-0 R-0 R-0 R-0 R-0 CHYACT CHXACT AGCACT WAKEZ WAKEY WAKEX ALARM PEI bit7 bit 0 Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown bit 8 CHZACT: This bit has no meaning in the MCP2035. Therefore, ignore this bit. This bit can be cleared via Soft Reset. bit 7 CHYACT: This bit has no meaning in the MCP2035. Therefore, ignore this bit. This bit can be cleared via Soft Reset bit 6 CHXACT : Input Channel (LCX) Active bit (cleared via Soft Reset). (Note 1) 1 = Input Channel (LCX) is passing data after TAGC 0 = Input Channel (LCX) is not passing data after TAGC bit 5 AGCACT : AGC Active Status bit (real time, cleared via Soft Reset) 1 = AGC is active (Input signal is strong). AGC is active when input signal level is approximately >20 mVPP range. 0 = AGC is inactive (Input signal is weak) bit 4-3 This bit has no meaning, and can be cleared via Soft Reset. bit 2 WAKEX : Wake-up Channel X Indicator Status bit (cleared via Soft Reset) 1 = Input Channel (LCX) caused a device wake-up (passed 64 clock counter) 0 = Input Channel (LCX) did not cause a device wake-up bit 1 ALARM : Indicates whether an Alarm Timer time-out has occurred (cleared via read “STATUS Register command”) 1 = The Alarm Timer time-out has occurred. It may cause the ALERT output to go low depending on the state of bit 4 of the Configuration register 0 0 = The Alarm Timer is not timed out bit 0 PEI : Parity Error Indicator bit – indicates whether a Configuration register parity error has occurred (real time) 1 = A parity error has occurred and caused the ALERT output to go low 0 = A parity error has not occurred Note 1: Bit is high whenever channel is passing data. Bit is low in Standby mode. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |