STM32F098CC datasheet(53/128 Pages) STMICROELECTRONICS

53 / 128 page

DocID026967 Rev 4

53/128

STM32F098CC STM32F098RC STM32F098VC

Electrical characteristics

6.2

Absolute maximum ratings

Stresses above the absolute maximum ratings listed in Table 20: Voltage characteristics,

Table 21: Current characteristics

and Table 22: Thermal characteristics may cause

permanent damage to the device. These are stress ratings only and functional operation of

the device at these conditions is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

Table 20. Voltage characteristics(1)

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

Symbol

Ratings

Min

Max

Unit

VDD–VSS

External main supply voltage

−0.3

1.95

VDDIO2–VSS External I/O supply voltage

- 0.3

4.0

VDDA–VSS External analog supply voltage

- 0.3

4.0

VDD–VDDA Allowed voltage difference for VDD > VDDA

-0.4

VBAT–VSS External backup supply voltage

- 0.3

4.0

VIN(2)

2. VIN maximum must always be respected. Refer to Table 21: Current characteristics for the maximum

allowed injected current values.

Input voltage on FT and FTf pins

VSS −0.3

VDDIOx + 4.0(3)

3. Valid only if the internal pull-up/pull-down resistors are disabled. If internal pull-up or pull-down resistor is

enabled, the maximum limit is 4 V.

Input voltage on POR pins

VSS −0.3

4.0

Input voltage on TTa pins

VSS −0.3

4.0

Input voltage on any other pin

VSS −0.3

4.0

|∆VDDx|

Variations between different VDD power pins

|VSSx - VSS|

Variations between all the different ground

pins

-50

VESD(HBM)

Electrostatic discharge voltage

(human body model)

see Section 6.3.11: Electrical

sensitivity characteristics

STM32F098CC Datasheet(PDF) 53 Page - STMicroelectronics

STM32F098CC Datasheet(HTML) 53 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL