STM32F098CC datasheet(84/128 Pages) STMICROELECTRONICS

84 / 128 page

Electrical characteristics

STM32F098CC STM32F098RC STM32F098VC

84/128

DocID026967 Rev 4

Figure 25. Recommended NRST pin protection

1. The external capacitor protects the device against parasitic resets.

2. The user must ensure that the level on the NRST pin can go below the VIL(NRST) max level specified in

Table 53: NRST pin characteristics

. Otherwise the reset will not be taken into account by the device.

NPOR pin characteristics

The NPOR pin input driver uses the CMOS technology. It is connected to a permanent pull-

up resistor to the VDDA, RPU.

Unless otherwise specified, the parameters given in Table 54 below are derived from tests

performed under ambient temperature and supply voltage conditions summarized in

Table 23: General operating conditions

Table 53. NRST pin characteristics

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

VIL(NRST) NRST input low level voltage

0.3 VDD+0.07(1)

VIH(NRST) NRST input high level voltage

0.445 VDD+0.398(1)

Vhys(NRST)

NRST Schmitt trigger voltage

hysteresis

200

RPU

Weak pull-up equivalent

resistor(2)

VIN = VSS

kΩ

VF(NRST) NRST input filtered pulse

100(1)

VNF(NRST) NRST input not filtered pulse

700(1)

1. Data based on design simulation only. Not tested in production.

2. The pull-up is designed with a true resistance in series with a switchable PMOS. This PMOS contribution to the series

resistance is minimal (~10% order).

STM32F098CC Datasheet(PDF) 84 Page - STMicroelectronics

STM32F098CC Datasheet(HTML) 84 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL