Another use case is wanting to have your weather station outside while still

receiving data on a display indoors somewhere. This could easily be

accomplished by attaching a BlueSMiRF Bluetooth module to the Serial 1

port and having another BlueSMiRF attached to a Serial Graphic LCD

display installed in your home.

A SparkFun BlueSMiRF Silver connected to the Serial 1 Port using a 6-pin,

right-angle female header with the outermost pins removed.

The pins on the shield match up with any of our BlueSMiRF modules. For

other wireless solutions, you may have to wire each pin manually as they

may not match up exactly.

RJ-11 Weather Meter Connectors

If you would like to place your Weather Shield outdoors and create a fully-

functional weather station, you can grab a set of Weather Meters and

connect them to the RJ-11 connectors located on the Weather Shield. With

these meters attached, you can measure wind speed, wind direction and

rainfall.

Weather Meters

 SEN-08942

Page 10 of 15