Design for Rugged Excellence

* All specifications are subject to change without notice.

V1.2a Oct, 2017

Introduction

RGS-P9160M2 series are IEC 61850-3 16-port modular rack mount managed redundant ring Ethernet switch with

16xGigabit combo / Gigabit fiber / 100Mbit fiber ports and provided 1 modular switch slot to extend switch function. The

switch is designed for power substation application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613.

Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or

temporary malfunctions with its fast recovery technology. RGS-P9160M2 series can also be managed centralized and

convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the

switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation application.



O-Ring : O-Ring is ORing’s proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to

250 nodes. The O-Ring redundant ring technology can protect mission-critical application from network

interruptions or temporary malfunction with its fast recover technology.



O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy

topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy

protocols to join and function together as a larger and more robust compound network topology. O-Chain providing

ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness in one set of

network redundancy topology.



rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with

Spanning Tree Protocol.



Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest

priority for data stream according to TCP/UDP port number.



Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address

to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker

from stealing video privacy data and attacking IP camera, NVR and controllers.



Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there

is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the

attack. It’s hardware based prevention so it can prevent DOS/DDOS attack immediately and completely.



Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks.



IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and

backplane Ethernet family of networking standards that will allow for less power consumption during periods of low

data activity. The intention was to reduce power consumption by 50% or more.



IEEE 1588V2 Technology : The IEEE 1588V2 technology can fulfill precision time synchronization requirements for

protection and control applications.



Modular Designed : Modular designed can makes network planning easy and allow greater flexibility by letting you

install other Ethernet/Optical fiber modular.

*NOTE: This function is available by request only

Introduction