| Electronic Components Datasheet Search |
|
MPC8540 Datasheet(PDF) 203 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8540 Datasheet(HTML) 203 Page - Freescale Semiconductor, Inc |
|
203 / 1302 page ![]() Functional Description MPC8540 PowerQUICC III Integrated Host Processor Reference Manual, Rev. 1 Freescale Semiconductor 4-17 NOTE While the width of both interfaces is controlled by this one configuration input, the protocol (TBI or GMII) used by each is separately controlled with other configuration inputs described in Section 4.4.3.8, “TSEC1 Protocol,” and Section 4.4.3.9, “TSEC2 Protocol.” 4.4.3.8 TSEC1 Protocol The TSEC1 protocol input, shown in Table 4-16, selects the protocol (GMII or TBI) used by the TSEC1 controller. Note that the value latched on this signal during POR is accessible through the memory-mapped PORDEVSR (POR device status register) described in Section 18.4.1.4, “POR Device Status Register (PORDEVSR).” 4.4.3.9 TSEC2 Protocol The TSEC2 protocol input, shown in Table 4-17, selects the protocol (GMII or TBI) used by the TSEC2 controller. Note that the value latched on this signal during POR is accessible through the memory-mapped PORDEVSR (POR device status register) described in Section 18.4.1.4, “POR Device Status Register (PORDEVSR).” Table 4-15. TSEC Width Configuration Functiona l Signal Reset Configuration Name Value (Binary) Meaning EC_MDC Default (1) cfg_tsec_reduce 0 Ethernet interfaces operate in reduced mode, either RTBI or RGMII, using only four transmit data signals and four receive data signals. 1 Ethernet interfaces operate in their standard TBI or GMII modes using eight transmit data signals and eight receive data signals (default). Table 4-16. TSEC1 Protocol Configuration Functional Signal Reset Configuration Name Value (Binary ) Meaning TSEC1_TXD 7 Default (1) cfg_tsec1 0 The TSEC1 controller operates using the GMII protocol (or RGMII if configured in reduced mode as described in Section 4.4.3.7, “TSEC Width”). 1 The TSEC1 controller operates using the TBI protocol (or RTBI if configured in reduced mode as described in Section 4.4.3.7, “TSEC Width”) (default). |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |