R16DS0137EU0100 Rev.1.0

Page 7

Apr 13, 2021

RAA210040 Datasheet

3.

Specifications

3.1

Absolute Maximum Ratings

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such

conditions can adversely impact product reliability and result in failures not covered by warranty.

3.2

Thermal Information

3.3

Recommended Operating Conditions

3.4

Electrical Specifications

.5

Parameter

Minimum

Maximum

Unit

VIN to PGND

-0.3

+5.8 (DC) or +7V

(20ms)

V

EN, FS, PG, FB, SYNC, COMP to SGND

-0.3

VIN + 0.3

V

VOUT to PGND

-0.3

VIN + 0.3

V

ESD Rating

Value

Unit

Human Body Model (Tested per JS-001-2014)

2.0

kV

Charged Device Model (Tested per JS-002-2014)

750

V

Latch-Up (Tested per JESD78E; Class II, Level A, +125°C)

100

mA

Thermal Resistance (Typical)

JA (°C/W)[1]

1.

JA is measured in free air with the module mounted on a 4-layer thermal test board 3x4.5 inch in size with significant coverage of 2oz

Cu on both top and bottom layers, and 1oz Cu on internal layers, with numerous vias.

JC (°C/W)[2]

2. For

JC, the case temperature location is the center of the exposed metal pad on the package underside.

10 Ld Dual Flat No-Lead Package

33.84

16.4

Parameter

Minimum

Maximum

Unit

Storage Temperature Range

-65

+150

°C

Pb-Free Reflow Profile

See TB493

Parameter

Minimum

Maximum

Unit

VIN to GND

2.7

5.5

V

Output Voltage, VOUT

0.6

5

V

Output Current, IOUT

04

A

Junction Temperature Range, TJ

-40

+125

°C

Unless otherwise noted, all parameter limits are established across the recommended operating conditions and the specification limits

are measured at the following conditions: TA=-40°C to +125°C, VIN = 3.6V, VOUT = 1.2V, unless otherwise noted. Typical specifications

are measured at TA=+25°C. Boldface limits apply across the internal junction temperature range, -40°C to +125°C.

Parameter

Symbol

Test Conditions

Min[1]

Typ

Max[1]

Unit

Module Input Supply

Input Voltage Range

VIN

2.7

5.5

V