RT600 datasheet(5/171 Pages) NXP

5 / 171 page

RT600

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 2.1 — 7 July 2023

5 of 173

NXP Semiconductors

RT600

Dual-core microcontroller with 32-bit Cortex-M33 and Xtensa HiFi4

Audio DSP CPUs



AES256 encryption module. The Random Number Generator can be used to

create keys. Key storage is in OTP. The AES supports DMA.



Physical Unclonable Function (PUF) key generation module.



SHA1/SHA2 Secure Hash Algorithm module. Supports secure boot, uses a

dedicated DMA controller.



Cryptography hardware coprocessor attached to Cortex-M33 CPU.



Analog peripherals:



One 12-bit ADC with sampling rates of 1 Msamples/sec and an enhanced ADC

controller. It supports up to 12 single-ended channels or 6 differential channels.

The ADC supports DMA.



Temperature sensor.



Analog comparator.



I/O peripherals:



Up to 147 general purpose I/O (GPIO) pins with configurable pull-up/pull-down

resistors. Ports can be written as words, half-words, bytes, or bits. The number of

GPIOs depends on the device package.



Individual GPIO pins can be used as edge and level sensitive interrupt sources,

each with its own interrupt vector.



All port0 and port1 GPIO pins can contribute to a one of two GPIO interrupts, with

selection of polarity and edge vs level triggering.



A group of up to 8 GPIO pins can be selected for boolean pattern matching, which

can generate interrupts and/or drive a pattern-match output.



Adjustable output drivers.



JTAG boundary scan.



Clock generation unit:



Crystal oscillator with an operating range of 4 MHz to 32 MHz.



Internal 48 or 60 MHz IRC oscillator. Trimmed to  1% accuracy.



Internal 16 MHz IRC oscillator. Trimmed to  3% accuracy.



Internal 1 MHz low-power oscillator with 10% accuracy. Serves as the watchdog

oscillator and clock for the OS Event Timer and the Systick. Also available as the

system clock.



32 kHz real-time clock (RTC) oscillator that can optionally be used as a system

clock.



Selectable on-chip crystal load capacitors for RTC oscillator.



Main System PLL:

- Allows CPU operation up to the maximum rate without the need for a high

frequency crystal. May be run from the 16 MHz IRC, the 48/60 MHz IRC, or the

crystal.

- Second PLL output using an independent fractional divider provides an alternate

high-frequency clock source for the DSP CPU if the required frequency differs from

the main system clock.

- Two additional PLL outputs, each using independent fractional dividers, providing

alternative clock input sources to a number of peripherals.



Audio PLL for the audio subsystem.



480 MHz USB PLL (internal to the USB PHY).



Clock output function with divider that can reflect any of the internal clock sources.



Power control:

RT600 Datasheet(PDF) 5 Page - NXP Semiconductors

RT600 Datasheet(HTML) 5 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL