| Electronic Components Datasheet Search |
|
STM32WL33C8 Datasheet(PDF) 66 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32WL33C8 Datasheet(HTML) 66 Page - STMicroelectronics |
|
66 / 91 page ![]() 6.3.15 I/O port characteristics Unless otherwise specified, the parameters given in the tables below are derived from tests performed under the conditions summarized in Section 6.3.1: Operating range. Table 56. I/O static characteristics Symbol Parameter Conditions Min. Typ. Max. Unit VIL I/O input low level voltage 1.62 V < VDD < 3.6 V - - 0.3 x VDD V VIH I/O input high level voltage 0.7 x VDD - - Ilkg Input leakage current 0 <= VIN <= Max(VDDx)(1) - - ±100 nA Max(VDDx) (1) <= VIN <= Max(VDDx) (1) +1 V - - 650 Max(VDDx)(1) + 1V < VIN <= 5.5 V - - 200 RPU Pull up resistor VIN=GND 25 40 55 kΩ RPD Pull down resistor VIN=VDD 25 40 55 CIO I/O pin capacitance - - 5 - pF 1. Max(VDDx) is the maximum value among all the I/O supplies All I/Os are CMOS-compliant (no software configuration required). The GPIOs (general purpose input/outputs) can sink or source up to ±8 mA and sink or source up to ±20 mA (with a relaxed VOL / VOH). In the user application, the number of I/O pins that can drive current must be limited to respect the absolute maximum rating specified. • The sum of the currents sourced by all the I/Os on VDD, plus the maximum consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating ΣIVDD. • The sum of the currents sunk by all the I/Os on VSS, plus the maximum consumption of the MCU sunk on GND, cannot exceed the absolute maximum rating ΣIVGND. Table 57. Output voltage characteristics Symbol Parameter Conditions Min. Max. Unit VOL Output low level voltage for an I/O pin CMOS port(1) |IIO| = 8 mA VDD ≥ 2.7 V - 0.4 V VOH Output high level voltage for an I/O pin VDD - 0.4 - VOL Output low level voltage for an I/O pin |IIO| = 20 mA VDD ≥ 2.7 V - 1.3 VOH Output high level voltage for an I/O pin VDD - 1.3 - VOL Output low level voltage for an I/O pin |IIO| = 4 mA VDD ≥ 1.62 V - 0.4 VOH Output high level voltage for an I/O pin VDD - 0.45 - 1. CMOS outputs are compatible with JEDEC standards JESD36 and JESD52. STM32WL33xx Electrical characteristics DS14221 - Rev 5 page 66/91 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |