ML22Q533 datasheet(122/178 Pages) ROHM

Part #	ML22Q533

Description	4-Channel Mixin g Speec h Synthesis LSIs with Built-in Flash M emor y fo r Automotive

PDF	178 Pages

Scroll/Zoom	100%

Manufacturer	ROHM [Rohm]

Direct Link	http://www.rohm.com

Logo

122 / 178 page

FEDL22Q53X-02

ML22Q53X

 CLOOP command

・ Command

CH3

CH2

CH1

CH0

1st byte

The CLOOP command releases repeat playback of the specified channel. This command can be input regardless of the NCR

signal status.

Setting the CH0 to CH3 bit to "1" cancels repeat playback of the corresponding channel. When repeat playback is released,

the NCR signal becomes "H" level.

The channel settings are as follows:

Channeled

Description

CH0

Setting this bit to 1 cancels repeat playback on channel 0.

CH1

Setting this bit to 1 cancels repeat playback on channel 1.

CH2

Setting this bit to 1 cancels repeat playback on channel 2.

CH3

Setting this bit to 1 cancels repeat playback on channel 3.

Be sure to specify one of the channels for the channel setting (CH0-CH3).

Do not input it to "0" (all “0”) with specifying nothing. If it is input with specifying nothing (all "0"), the command is ignored.

For the timing of the CLOOP command, refer to the "Repeat playback setting/release timing by SLOOP/CLOOP command"

in the timing chart.

122/178

ML22Q533 Datasheet(PDF) 122 Page - Rohm