| Electronic Components Datasheet Search |
|
HD6432142 Datasheet(PDF) 468 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD6432142 Datasheet(HTML) 468 Page - Renesas Technology Corp |
|
468 / 1177 page ![]() Section 15 Serial Communication Interface (SCI, IrDA) Rev. 4.00 Sep 27, 2006 page 424 of 1130 REJ09B0327-0400 Synchronous mode: Serial data communication is synchronized with a clock Serial data communication can be carried out with other chips that have a synchronous communication function One serial data transfer format Data length: 8 bits Receive error detection: Overrun errors detected • Full-duplex communication capability The transmitter and receiver are mutually independent, enabling transmission and reception to be executed simultaneously Double-buffering is used in both the transmitter and the receiver, enabling continuous transmission and continuous reception of serial data • LSB-first or MSB-first transfer can be selected This selection can be made regardless of the communication mode (with the exception of 7-bit data transfer in asynchronous mode)* Note: * LSB-first transfer is used in the examples in this section. • Built-in baud rate generator allows any bit rate to be selected • Choice of serial clock source: internal clock from baud rate generator or external clock from SCK pin • Capability of transmit and receive clock output The P86/SCK1 and P42/SCK2 pins are CMOS type outputs The P52/SCK0 pin is an NMOS push-pull type output in the H8S/2148 Group and H8S/2147N, and is a CMOS output in the H8S/2144 Group (When the P52/SCK0 pin is used as an output in the H8S/2148 Group and H8S/2147N, external pull-up resistor must be connected in order to output high level) • The transmit-data-empty interrupt and receive-data-full interrupt can activate the data transfer controller (DTC) to execute data transfer • Four interrupt sources Four interrupt sources (transmit-data-empty, transmit-end, receive-data-full, and receive error) that can issue requests independently The transmit-data-empty interrupt and receive-data-full interrupt can activate the data transfer controller (DTC) to execute data transfer |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |