P5DF081 datasheet(7/36 Pages) NXP

7 / 36 page

P5DF081_SDS

All information provided in this document is subject to legal disclaimers.

Objective short data sheet

PUBLIC

Rev. 1 — 12 August 2010

191710

7 of 36

NXP Semiconductors

P5DF081

MIFARE SAM AV2

8.2.4 UID/serial number

The MIFARE SAM AV2 IC features a 7 byte unique serial number that is programmed into

a locked part of the non-volatile memory that is reserved for the manufacturer. This UID is

fixed and cannot be changed.

8.3 MIFARE SAM AV1 compatibility mode vs. MIFARE SAM AV2 mode

Unless stated explicitly otherwise, all information in this document refer to both the

MIFARE SAM AV1 compatibility mode and to the pure MIFARE SAM AV2 mode.

Commands only available in pure MIFARE SAM AV2 mode are flagged as "AV2 only".

Differences for commands different in SAM AV2 with respect to their corresponding SAM

AV1 compatibility version are listed explicitly as well.

The main differences between the AV1 compatibility mode and the AV2 mode are the

following:

• PKI commands are only available in AV2 mode

• AV2 mode introduces key classes: Host Keys, PICC keys, OfflineChange keys and

OfflineCrypto keys. All symmetric key entries are classified into one of them,

restricting the possible usage of the key entry.

• AV2 mode improves the SAM access protection by replacing the AV1 compatibility

Host Authentication protocols with more secure variants.

• AV2 mode improves the SAM-Host communication protection by replacing the AV1

compatibility increased security mode (based on CMACing) by three modes of secure

messaging after a host authentication (Plain, MAC Protection and Full Protection).

• AV2 mode replaces and adds some key entry configuration options, offering more

flexibility in securing the SAM (e.g. regarding key dumping).

P5DF081 Datasheet(PDF) 7 Page - NXP Semiconductors