Setting up Lauterbach environment

AN4498

12/19

DocID026377 Rev 1

3.3.2

Setting debugging path

Figure 8. Batchfile – setting debugger working directory and BDM clock

In the line 50 of the described script it is reported the command to store the working

directory into “path” and change the path for working directory of core1 to the path of core0

debugger.

OS.PWD() - returns the name of the working directory as a string.

Select the frequency for the debug interface. For multicore debugging, it is recommended to

set the same JTAG frequency for all cores.

In the line 56 the BDM clock frequency is selected.

SYStem.CPU SPC56XX - sets up selected microcontroller. This is mainly used when there

is not a support for new derivative of microcontroller, and user wants set by hand processor

from same family.

SYStem.DETECT CPU - detects automatically connected microcontroller if it is in list of

supported microprocessors.

CPU() - returns the name of the processor as string (same as STATE.PROCESSOR). It’s

the same as selected with SYStem.CPU