UM0855 datasheet(24/35 Pages) STMICROELECTRONICS

24 / 35 page

STEVAL-MKI0xxV1 Lite

UM0855

24/35

Doc ID 16617 Rev 1

STEVAL-MKI0xxV1 Lite

A lite version of the GUI together with its source code is also included in the installation

pack. The source code can be found in the directory: ($Home)\STM\STEVAL-

MKI0xxV1\STEVAL-MKI0xxV1_lite, where ($Home) is the directory in which the software

that came with the demonstration kit was installed (C:\Program Files by default).

The purpose of the lite version is to provide the user with a foundation for the development

of a customized application.

The lite version of the demonstration kit is started by launching the STEVAL-MKI0xxV1 Lite

executable file located in the STEVAL-MKI0xxV1 > Executables folder.

An example of the GUI of the STEVAL-MKI0xxV1 Lite application is shown in

Figure 17.

STEVAL-MKI0xxV1 Lite GUI

Follow these instructions to use the software:

Connect the STEVAL-MKI0xxV1 to the USB port.

Launch the GUI for STEVAL-MKI0xxV1 Lite.

Select the virtual COM port and click on the “Connect” button.

Select the destination file to which the yaw rate data must be saved (optional).

Click on the “START” (or “STOP”) button to activate (or stop) the sensor data collection,

saving to file, and screen plotting functions.

To close the application, click on “Disconnect” and then click on “Exit”.

UM0855 Datasheet(PDF) 24 Page - STMicroelectronics