 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
FT905 Datasheet(PDF) 21 Page - Future Technology Devices International Ltd. |
|
|
|||||||||||||||||||||||||||||
FT905 Datasheet(HTML) 21 Page - Future Technology Devices International Ltd. |
|
|
21 / 56 page  Copyright © 2014 Future Technology Devices International Limited 21 FT905 _6_7_8/6/7/8 Embedded Microcontroller Datasheet Version 1.0 Document No.: FT_001131 Clearance No.: FTDI#422 QFN Pin No. LQFP Pin No. Name Type Description 64 68 TXON O Ethernet transmit data negative output.[2] Differential transmit signal pair. 65 69 RTC_XIO AO Output from the RTC Oscillator amplifier. 66 70 RTC_XI/RTC_CLKIN AI 32.768KHz clock frequency input to the RTC Oscillator circuit or to internal RTC clock generator circuit. 67 71 NC - Not connected. 68 72 ADC1/GPIO6 I/O GPIO6 input/output. (By default is GPIO input, internal pull-low) 10-bit A/D converter 1, input. 69 73 ADC2/GPIO7 I/O GPIO7 input/output. (By default is GPIO input, internal pull-low) 10-bit A/D converter 2, input. 70 74 ADC3/GPIO8 I/O GPIO8 input/output. (By default is GPIO input, internal pull-low) 10-bit A/D converter 3, input. 71 75 ADC4/GPIO9 I/O GPIO9 input/output. (By default is GPIO input, internal pull-low) 10-bit A/D converter 4, input. 72 76 AGND P Analog Ground 73 77 VCC3V3A P +3.3V supply voltage. This is the supply voltage for Analog I/O ports. Connect 10uF and 0.1uF decoupling capacitors. This pin could be connected to all +3.3V power supply pins without 10uF capacitor. 74 78 DAC_REFP P 10-bit DAC positive reference voltage. 75 79 DAC1/GPIO13 I/O GPIO13 input/output. (By default is GPIO input, internal pull-low) 10-bit D/A converter 1, output. 76 80 DAC0/GPIO14 I/O GPIO14 input/output. (By default is GPIO input, internal pull-low) 10-bit D/A converter 0, output. Table 3-1 FT905 pin description [1] CAN Bus 0/1 only are featured on both FT905 and FT907 packages. [2] Ethernet pins are available on FT905 and FT906 only. For FT907 and FT908, shall leave all Ethernet pins as NC pin floating except for ENET_LED0/GPIO4 and ENET_LED1/GPIO5 as GPIO by default. Notes: |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
