| Electronic Components Datasheet Search |
|
USB3803 Datasheet(PDF) 68 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB3803 Datasheet(HTML) 68 Page - Microchip Technology |
|
68 / 99 page ![]() USB3803 DS00001691B-page 68 2014-2015 Microchip Technology Inc. 7.7 String Descriptors The USB3803 supports a 30 Character Manufacturer String Descriptor, a 30 Character Product String and a 30 charac- ter Serial String. 6 HubContrCurrent 1 user Maximum current requirements of the Hub Controller electronics in 1 mA increments. See Section 11.23.2.1 in the USB Specification for additional details on the use of this field. This field reports the maximum current that only the hub consumes from upstream VBUS when fully operational. This value includes all support circuitry associated with the hub (but does not include the current consumption of any permanently attached peripherals if the hub is part of a compound device). The Hub supports Self-Powered and Bus-Powered operation. The SELF_BUS_PWR bit (CONFIG_- BYTE_1) defined in Section 5.3.7, "Register 06h: CON- FIG_BYTE_1 - CFG1," on page 24 is used to determine which of the stored values are reported. The value reported to the host must coincide with the current oper- ating mode, and will be determined by the following rules. The value that is reported to the host will be: ‘HC_MAX_C_BP’ if SELF_BUS_PWR = ‘0’ ‘HC_MAX_C_SP’ if SELF_BUS_PWR = ‘1’ ‘HC_MAX_C_BP/SP’ are defined in Section 5.3.15, and Section 5.3.16, "Register 0Fh: Hub Controller Max Cur- rent For Bus Powered Operation - HCMCB," on page 28. In all cases the reported value is sourced from the Hub Controller Max Current data field (for Self or Bus power) that was determined by Internal Default, or serial port load. 7 DeviceRemovable 1 user Indicates if port has a removable device attached. See Section 11.23.2.1 in the USB Specification. The value contained in the ‘NR_DEVICE’ field is directly reported to the host, and is determined by Internal Default, or serial port load. 8 PortPwrCtrlMask 1 FFh Field for backwards USB 1.0 compatibility. TABLE 7-33: CLASS-SPECIFIC HUB DESCRIPTOR (FULL-SPEED & HIGH-SPEED) (CONTINUED) Offset Field Size Value Description |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |