L9662 datasheet(26/80 Pages) STMICROELECTRONICS

26 / 80 page

Functional description

L9662

26/80

DocID028325 Rev 1

Functional description

3.1

Overview

The device is an integrated circuit to be used in air bag systems. Its main functions include

deployment of air bags and switched-power sources to satellite sensors. The device

supports 8 deployment loops and 4 satellite-sensor interfaces.

3.2

General functions

3.2.1

Power on reset (POR)

The ASIC has a power on reset (POR) circuit, which monitors VDD voltage. When VDD

voltage falls below VRST1 for longer than or equal to tPOR, all outputs are disabled and all

internal registers are reset to their default condition. A second reset level, VRST2, also

monitors VDD but uses no filter time and will disable all outputs and all internal registers are

reset to their default condition when VDD falls below the reset threshold.

Figure 6. POR timing

3.2.2

RESETB

The RESETB pin is active low. The effects of RESETB are similar to those of a POR event,

except during a deployment. When a deployment is in-progress, the ASIC will ignore the

RESETB signal.

However, it shall shut itself down as soon as it detects a POR condition. When the

deployment is completed and RESETB signal is asserted, the device disables its outputs

and reset its internal registers to their default states.

A de-glitch timer is provided for the RESETB pin. The timer protects this pin against

spurious glitches. The ASIC neglects RESETB signal if it is asserted for shorter than

tGLITCH. RESETB has an internal pull-up in case of an open circuit.

L9662 Datasheet(PDF) 26 Page - STMicroelectronics