ZSC31010CEC datasheet(11/43 Pages) IDT

11 / 43 page

ZSC31010 Datasheet

January 20, 2016

Circuit Description

2.1.

Signal Flow and Block Diagram

The ZSC31010 resistive bridge sensor interface ICs were specifically designed as a cost-effective solution for

sensing in building automation, industrial, office automation, and white goods applications. The RBicLite™ employs

IDT’s high precision bandgap with proportional-to-absolute temperature (PTAT) output; a low-power 14-bit

analog-to-digital converter (ADC, A2D, A-to-D); and an on-chip DSP core with EEPROM to precisely calibrate the

bridge output signal. Three selectable output modes, two analog and one digital, offer the ultimate in versatility

across many applications.

The ZSC31010 rail-to-rail ratiometric analog output Vout signal (0 to 5 V, Vout @ VDD = 5 V) suits most building

automation and automotive requirements. Typical office automation and white goods applications require the

0 to 1 Vout signal, which in the ZSC31010 is referenced to the internal bandgap. Direct interfacing to

microprocessor controllers is facilitated via IDT’s single-wire serial ZACwire™ digital interface.

The ZSC31010 is capable of running in high-voltage (5.5 to 30 V) systems when combined with an external JFET.

Figure 2.1

ZSC31010 Block Diagram

ADC

Analog Block

Digital Block

RBicLITE™

ZSC31010

0 V to 1 V

Ratiometric

Rail-to-Rail

OWI/

ZACwire

0.1

VSS

VBP

DAC

OUTBUF

ZACwire

Interface

DSP

EEPROM

PREAMP

INMUX

Temp.

Reference

VDD

Regulator

Power Save

POR Osc.

VBN

Vgate

VDD

SIG

Bsink

optional

2.7 to 5.5 V

JFET

(optional if supply is 2.7 to 5.5 V)

VSUPPLY

5.5 V to 30 V

1nF

ZSC31010CEC Datasheet(PDF) 11 Page - Integrated Device Technology

ZSC31010CEC Datasheet(HTML) 11 Page - Integrated Device Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Datasheet Download

Link URL