DSOX6MASK datasheet(6/45 Pages) KEYSIGHT

6 / 45 page

06 | Keysight | InfiniiVision 6000 X-Series Oscilloscopes - Data Sheet

New Standard for Price Performance: Bandwidth, Visualization, and Integration

Bandwidth (Continued)

6 GHz Noise floor: 210 µVrms at 1 mV/div

Accurate signal integrity measurements with an oscilloscope

start with a low noise floor. With an innovative all-new front-end

ASIC, the 6000 X-Series achieves a 210-μVrms noise floor at 1

mV/div for 6-GHz bandwidth or 115-μVrms noise floor at 1 mV/

div for 1-GHz bandwidth, helping you to make the most precise

measurements.

More bandwidth may not be the best solution when you are making

low-noise measurements, as the additional bandwidth captures

additional high-frequency noise along with high-frequency

signal content. To make the best measurements, you need the

appropriate bandwidth for your application. The 6000 X-Series

oscilloscopes have standard hardware bandwidth limit filters in

addition to software low-pass math function filters, so you can

set the best bandwidth for your application.

An added bonus: the new front-end technology allows you to

upgrade bandwidth from any bandwidth point with a simple

software license installation.

Superior form factor: 6 GHz, 6 inches deep

Have you carried around your 6-GHz oscilloscope lately? With the

6000 X-Series, the multi-GHz bandwidth no longer necessitates

enormous size, weight, and power consumption. At only 6 inches

(154 mm) deep and 15 lbs. (6.8 kg), the ultra-compact form

factor consumes a maximum of only 200 watts, so you can enjoy

portability and performance at the same time.

Figure 6. Measuring the noise floor of a 6-GHz scope at 1 mV/div.

Figure 5. The new 6-GHz front-end design.

Figure 7. You can set the hardware bandwidth limit control interface per

channel at any time.

Figure 8. One- gigahertz-per-inch form factor: 6 GHz, 6 inches deep.

DSOX6MASK Datasheet(PDF) 6 Page - Keysight Technologies