DPO4USB datasheet(41/46 Pages) TEKTRONIX

41 / 46 page

DPO4COMP

Computer Serial Triggering and Analysis Module. Enables triggering on packet-level information on RS-232/422/485/UART buses

as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables

with time-stamp information.

Signal Inputs - Any Ch1 - Ch4, any D0 - D15

Recommended Probing - RS-232/UART: Single ended; RS-422/485: Differential

DPO4EMBD

Embedded Serial Triggering and Analysis Module. Enables triggering on packet-level information on I2C and SPI buses as well as

analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet decode tables with time-

stamp information.

Signal Inputs - I2C or SPI: Any Ch1 - Ch4, any D0 - D15

Recommended Probing - Single ended

DPO4ENET

Ethernet Serial Triggering and Analysis Module. Enables triggering on packet-level information on 10BASE-T and 100BASE-

TX 4 buses as well as analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet

decode tables with time-stamp information.

Signal Inputs - Any Ch1 - Ch4, Math, Ref1 - Ref4

Recommended Probing - 10BASE-T: Single ended or differential; 100BASE-TX: Differential

DPO4USB

USB Serial Triggering and Analysis Module. Enables triggering on packet-level content for low-speed, and full-speed USB serial

buses. Also enables analytical tools such as digital views of the signal, bus views, packet decoding, search tools, and packet

decode tables with time-stamp information for low-speed, full-speed, and high-speed USB serial buses. 5

Signal Inputs - Low-speed and Full-speed: Any Ch1 - Ch4, any D0 - D15; Low-speed, Full-speed, and High-speed: Any Ch1 - Ch4,

Math, Ref1 - Ref4

Recommended Probing - Low-speed and Full-speed: Single ended or differential; High-speed: Differential

DPO4PWR

Power Analysis Application Module. Enables quick and accurate analysis of power quality, switching loss, harmonics, safe

operating area (SOA), modulation, ripple, and slew rate (dI/dt, dV/dt).

DPO4LMT

Limit and Mask Testing Application Module. Enables testing against limit templates generated from "golden" waveforms and mask

testing using custom masks. 6

DPO4VID

HDTV and Custom (nonstandard) Video Triggering and Video Picture Module.

MDO4TRIG

Advanced RF Power Level Triggering Module. Enables the power level on the spectrum analyzer input to be used as a source in

the following trigger types: Pulse Width, Runt, Timeout, Logic, and Sequence.

Recommended accessories

Probes

Tektronix offers over 100 different probes to meet your application needs. For a comprehensive listing of available probes, please visit www.tek.com/probes.

TPP0500B

500 MHz, 10X TekVPI® passive voltage probe with 3.9 pF input capacitance

TPP0502

500 MHz, 2X TekVPI® passive voltage probe with 12.7 pF input capacitance

TPP0850

2.5 kV, 800 MHz, 50X TekVPI® passive high-voltage probe

TPP1000

1 GHz, 10X TekVPI® passive voltage probe with 3.9 pF input capacitance

TAP1500

1.5 GHz TekVPI® active single-ended voltage probe

TAP2500

2.5 GHz TekVPI® active single-ended voltage probe

TAP3500

3.5 GHz TekVPI® active single-ended voltage probe

TCP0030

120 MHz TekVPI® 30 Ampere AC/DC current probe

≥350 MHz bandwidth models are recommended for 100BASE-TX.

USB high-speed supported only on models with 1 GHz analog channel bandwidth.

≥350 MHz bandwidth models are recommended for mask testing on telecomm standards >55 Mb/s. 1 GHz bandwidth models are recommended for mask testing on high-speed (HS) USB.

MDO4000C Series Oscilloscope

DPO4USB Datasheet(PDF) 41 Page - TEKTRONIX, INC.

DPO4USB Datasheet(HTML) 41 Page - TEKTRONIX, INC.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Datasheet Download

Link URL