F2912

High Reliability SP2T RF Switch

2

F2912, Rev 3, 04/01/2016

Parameter

Symbol

Min

Max

Units

VCC to GND

-0.3

+3.9

V

CTL1, CTL2, LogicCTL

-0.3

V

RF1, RF2, RF_Com

-0.3

+0.3

V

Maximum Junction Temperature

+140

°C

Storage Temperature Range

-65

+150

°C

Lead Temperature (soldering, 10s)

+260

°C

ElectroStatic Discharge – HBM

(JEDEC/ESDA JS-001-2012)

Class 2

(2000)

V

ElectroStatic Discharge – CDM

(JEDEC 22-C101F)

Class IV

(1500)

V

RF Power For Case Temperatures up to +85 °C*

RF1, RF2 (RF1 or RF2 is connected to RF_COM, State 3 and 2)

+33 dBm

RF1, RF2 (RF1 or RF2 is NOT connected to RF_COM, State 1, 2 and 3)

+24 dBm

RF_COM (RF_COM port is NOT connected to RF1 or RF2, State 1)

+24 dBm

RF Power For Case Temperatures up to +105 °C*

RF1, RF2 (RF1 or RF2 is connected to RF_COM, State 3 and 2)

+33 dBm

RF1, RF2 (RF1 or RF2 is NOT connected to RF_COM, State 1, 2 and 3)

+21 dBm

RF_COM (RF_COM port is NOT connected to RF1 or RF2, State 1)

+21 dBm

RF Power For Case Temperatures up to +120 °C*

RF1, RF2 (RF1 or RF2 is connected to RF_COM, State 3 and 2)

+27 dBm

RF1, RF2 (RF1 or RF2 is NOT connected to RF_COM, State 1, 2 and 3)

+18 dBm

RF_COM (RF_COM port is NOT connected to RF1 or RF2, State 1)

+18 dBm

* Note: These Absolute Maximum RF power limits are reduced if the RF frequency is lower than 400 MHz.

Stresses above those listed above may cause permanent damage to the device. Functional operation of the device at

these or any other conditions above those indicated in the operational section of this specification is not implied.

Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

60.0 °C/W

3.9 °C/W

Moisture Sensitivity Rating (Per J-STD-020)

MSL 1