| Electronic Components Datasheet Search |
|
ADP5360ACBZ-1-R7 Datasheet(PDF) 41 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP5360ACBZ-1-R7 Datasheet(HTML) 41 Page - Analog Devices |
|
41 / 60 page ![]() Data Sheet ADP5360 Rev. 0 | Page 41 of 60 Table 25. CHARGER_FUNCTION_SETTING, Address 0x07 Bit Descriptions Bit(s) Bit Name Access Default Description 7 EN_JEITA R/W 0 When low, this bit disables the JEITA Li-Ion temperature battery charging specification. 6 ILIM_JEITA_COOL R/W 0 When in temperature cool mode, select the battery charging current. 0 = approximately 50% of programmed charge current. 1 = approximately 10% of programmed charge current. 5 Reserved R/W Not applicable Reserved . 4 OFF_ISOFET R/W 0 When high, ISOFET is forced to turn off, and VSYS is shut down only when the battery is present. 3 EN_LDO R/W 1 When low, the charge LDO is disabled. When high, the charge LDO is enabled. 2 EN_EOC R/W 1 When high, end of charge is allowed. 1 EN_ADPICHG R/W 0 When high, the VBUS adaptive current-limit function is enabled during charging. When low, the VBUS adaptive current-limit function is disabled during charging. 0 EN_CHG R/W Factory set When low, charging is disabled. When high and EN_LDO = high, charging is enabled. Table 26. CHARGER_STATUS1, Address 0x08 Bit Descriptions Bit(s) Bit Name Access Default Description 7 VBUS_OV R Not applicable When high, this bit indicates that the VBUS voltage is over the threshold of VVBUS_OK. 6 ADPICHG R Not applicable When high, this bit indicates that the adaptive charge current is active. 5 VBUS_ILIM R Not applicable When high, this bit indicates that the current into the VBUS pin is limited by the high voltage blocking FET and that the charger is not running at the full programmed ICHG. [4:3] Reserved R Not applicable Reserved . [2:0] CHARGER_STATUS[2:0] R Not applicable Charger Status Bus. The following values are indications for the charger status: 000 = off. 001 = trickle charge. 010 = fast charge (constant current mode). 011 = fast charge (constant voltage mode). 100 = charge complete. 101 = LDO mode. 110 = trickle or fast charge timer expired. 111 = battery detection. Table 27. CHARGER_STATUS2, Address 0x09 Bit Descriptions Bit(s) Bit Name Access Default Description [7:5] THR_STATUS[2:0] R Not applicable THR Pin Status. The following values are indications for the THR pin NTC resistor value: 000 = off. 001 = battery cold. 010 = battery cool. 011 = battery warm. 100 = battery hot. 111 = thermistor okay. 4 BAT_OV_STATUS R Not applicable Battery Overvoltage Status. 0 = no battery overvoltage protection. 1 = battery overvoltage protection. 3 BAT_UV_STATUS R Not applicable Battery Undervoltage Status. 0 = no battery undervoltage protection. 1 = battery undervoltage protection. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |