| Electronic Components Datasheet Search |
|
4513 Datasheet(PDF) 139 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
4513 Datasheet(HTML) 139 Page - Renesas Technology Corp |
|
139 / 210 page ![]() APPLICATION 2.3 Timers 2-36 4513/4514 Group User’s Manual Fig. 2.3.7 Timer start by external input setting example (1) 0 b3 b0 Disable Interrupts Timer 1 interrupt is temporarily disabled. Interrupt enable flag INTE Interrupt control register V1 “0” !! All interrupts disabled (DI instruction) Timer 1 interrupt occurrence disabled (TV1A instruction) INT0 interrupt occurrence disabled 0 b3 b0 00 Stop Timer Operation Timer 1 and prescaler are temporarily stopped. Dividing ratio of prescaler is selected. Timer control register W1 ! Timer 1 stop (TW1A instruction) Prescaler stop Prescaler divided by 4 selected 0 Set Timer Value Timer 1 count time is set. Timer 1 reload register R1 “5216” Timer count value 82 set (T1AB instruction) b3 b0 1 Set Port P30/INT0 pin is set to INT0 input. Port P30 output latch ! ! ! INT0 input set (OP3A instruction) b3 b0 1 Set Valid Waveform Valid waveform of INT0 pin is selected. Timer 1 control is enabled. Interrupt control register I1 ! Rising edge detected (TI1A instruction) 10 g0 h Clear Interrupt Request Timer 1 interrupt activated condition is cleared. INT0 interrupt activated condition is cleared. Timer 1 interrupt request flag T1F INT0 interrupt request flag EXF0 “0” Timer 1 interrupt activated condition cleared (SNZT1 instruction) INT0 interrupt activated condition cleared (SNZ0 instruction) “0” Note when the interrupt request is cleared When is executed, considering the skip of the next instruction according to the interrupt request flags T1F and EXF0, insert the NOP instruction after the SNZT1 and SNZ0 instructions. b3 b0 1 Enable Interrupts The timer 1 interrupt which is temporarily disabled is enabled. Interrupt control register V1 Interrupt enable flag INTE “1” Timer 1 interrupt occurrence enabled (TV1A instruction) All interrupts enabled (EI instruction) !! ! Timer start by external input “!”: it can be “0” or “1.” |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |