P89LPC915FDH datasheet(59/75 Pages) NXP

59 / 75 page

P89LPC915_916_917_5

Product data sheet

Rev. 05 — 15 December 2009

59 of 75

NXP Semiconductors

P89LPC915/916/917

8-bit microcontrollers with accelerated two-clock 80C51 core

[1]

Typical ratings are not guaranteed. The values listed are at room temperature, 3 V.

[2]

The IDD(oper),IDD(idle), and IDD(pd) speciﬁcations are measured using an external clock with the following functions disabled: comparators,

real-time clock, and watchdog timer.

[3]

The IDD(tpd) speciﬁcation is measured using an external clock with the following functions disabled: comparators, real-time clock,

brownout detect, and watchdog timer.

[4]

See Section 10 “Limiting values” for steady state (non-transient) limits on IOL or IOH. If IOL/IOH exceeds the test condition, VOL/VOH may

exceed the related speciﬁcation.

[5]

This speciﬁcation can be applied to pins which have A/D input or analog comparator input functions when the pin is not being used for

those analog functions. When the pin is being used as an analog input pin, the maximum voltage on the pin must be limited to 4.0 V with

respect to VSS.

[6]

Pin capacitance is characterized but not tested.

[7]

Measured with port in quasi-bidirectional mode.

[8]

Measured with port in high-impedance mode.

[9]

Port pins source a transition current when used in quasi-bidirectional mode and externally driven from logic 1 to logic 0. This current is

highest when VI is approximately 2 V.

ILI

input leakage current

VI =VIL,VIH or Vth(HL)

[8] --

±10

µA

ITL

logical 1-to-0 transition

current, all ports

VI = 1.5 V at VDD = 3.6 V

[9]

−30

−450

µA

RRST(int)

internal pull-up resistance

on pin RST

Ω

Vbo

brownout trip voltage

2.4 V < VDD < 3.6 V; with

BOV = 1, BOPD = 0

2.40

2.70

Vref(bg)

band gap reference voltage

1.11

1.23

1.34

TCbg

band gap temperature

coefﬁcient

ppm/

°C

Table 15.

Static characteristics …continued

VDD = 2.4 V to 3.6 V unless otherwise speciﬁed.

Tamb = −40 °C to +85 °C, or −40 °C to +125 °C (see Table 3 on page 3), unless otherwise speciﬁed.

Symbol

Parameter

Conditions

Min

Typ[1]

Max

Unit

P89LPC915FDH Datasheet(PDF) 59 Page - NXP Semiconductors

P89LPC915FDH Datasheet(HTML) 59 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

Datasheet Download

Link URL