STM32F101RF datasheet(37/108 Pages) STMICROELECTRONICS

37 / 108 page

STM32F101xF, STM32F101xG

Electrical characteristics

Doc ID 17143 Rev 2

37/108

Table 8.

Current characteristics

Symbol

Ratings

Max.

Unit

IVDD

Total current into VDD/VDDA power lines (source)

(1)

All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power

supply, in the permitted range.

150

IVSS

Total current out of VSS ground lines (sink)

(1)

150

IIO

Output current sunk by any I/O and control pin

Output current source by any I/Os and control pin

 25

IINJ(PIN)

(2)

Negative injection disturbs the analog performance of the device. See note in Section 5.3.18: 12-bit ADC

characteristics.

Injected current on five volt tolerant pins(3)

Positive injection is not possible on these I/Os. VIN maximum must always be respected. IINJ(PIN) must

never be exceeded. A negative injection is induced by VIN<VSS.

-5/+0

Injected current on any other pin(4)

IINJ(PIN) must never be exceeded. This is implicitly insured if VIN maximum is respected. If VIN maximum

cannot be respected, the injection current must be limited externally to the IINJ(PIN) value. A positive

injection is induced by VIN>VDD while a negative injection is induced by VIN<VSS.

± 5

I

INJ(PIN)

Total injected current (sum of all I/O and control pins)(5)

When several inputs are submitted to a current injection, the maximum

I

INJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values). These results are based on

characterization with

I

INJ(PIN) maximum current injection on four I/O port pins of the device.

± 25

Table 9.

Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

–65 to +150

°C

Maximum junction temperature

150

°C

STM32F101RF Datasheet(PDF) 37 Page - STMicroelectronics

STM32F101RF Datasheet(HTML) 37 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL