Electronic Components Datasheet Search |
|
ADG799G Datasheet(PDF) 16 Page - Analog Devices |
|
|
ADG799G Datasheet(HTML) 16 Page - Analog Devices |
16 / 24 page ADG799A/ADG799G Rev. 0 | Page 16 of 24 TERMINOLOGY On Resistance (RON) The series on-channel resistance measured between the S and D pins. On Resistance Match (ΔRON) The channel-to-channel matching of on resistance when channels are operated under identical conditions. On Resistance Flatness (RFLAT(ON)) The variation of on resistance over the specified range produced by the specified analog input voltage change with a constant load current. Channel Off Leakage (IOFF) The sum of leakage currents into or out of an off channel input. Channel On Leakage (ION) The current loss/gain through an on-channel resistance, creating a voltage offset across the device. Input Leakage Current (IIN, IINL, IINH) The current flowing into a digital input when a specified low level or high level voltage is applied to that input. Input/Output Off Capacitance (COFF) The capacitance between an analog input and ground when the switch channel is off. Input/Output On Capacitance (CON) The capacitance between the inputs or outputs and ground when the switch channel is on. Digital Input Capacitance (CIN) The capacitance between a digital input and ground. Output On Switching Time (tON) The time required for the switch channel to close. The time is measured from 50% of the falling edge of the LDSW bit to the time the output reaches 90% of the final value. Output Off Switching Time (tOFF) The time required for the switch to open. The time is measured from 50% of the falling edge of the LDSW bit to the time the output reaches 10% of the final value. I2C to GPO Propagation Delay (tH, tL) The time required for the logic value at the GPO pin to settle after loading a GPO command. The time is measured from 50% of the falling edge of the LDSW bit to the time the output reaches 90% of the final value for high and 10% for low. Total Harmonic Distortion + Noise (THD + N) The ratio of the harmonic amplitudes plus noise of a signal to the fundamental. −3 dB Bandwidth The frequency at which the output is attenuated by 3 dB. Off Isolation The measure of unwanted signal coupling through an off switch. Crosstalk The measure of unwanted signal that is coupled through from one channel to another because of parasitic capacitance. Charge Injection The measure of the glitch impulse transferred from the digital input to the analog output during on/off switching. Differential Gain Error The measure of how much color saturation shift occurs when the luminance level changes. Both attenuation and amplifica- tion can occur; therefore, the largest amplitude change between any two levels is specified and expressed in %. Differential Phase Error The measure of how much hue shift occurs when the luminance level changes. It can be a negative or positive value and is expressed in degrees of subcarrier phase. Input High Voltage (VINH) The minimum input voltage for Logic 1. Input Low Voltage (VINL) The maximum input voltage for Logic 0. Output High Voltage (VOH) The minimum output voltage for Logic 1. Output Low Voltage (VOL) The maximum output voltage for Logic 0. IDD Positive supply current. |
Similar Part No. - ADG799G_15 |
|
Similar Description - ADG799G_15 |
|
|
Link URL |
Privacy Policy |
ALLDATASHEET.NET |
Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |