| Electronic Components Datasheet Search |
|
UM1865 Datasheet(PDF) 51 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UM1865 Datasheet(HTML) 51 Page - STMicroelectronics |
|
51 / 132 page ![]() DocID027514 Rev 1 51/132 UM1865 Vendor specific commands 132 Event(s) generated: A command status event is generated as soon as the command is given. If BLE_STATUS_SUCCESS is returned, the procedure is terminated when either a connection is successfully established with one of the specified devices in the white list or the procedure is explicitly terminated by issuing the command Aci_Gap_Terminate_Gap_Procedure with the procedure code set to 0x08. A Evt_Blue_Gap_Procedure_Complete event is returned with the procedure code set to 0x08. Conn_Interval_Max 2 bytes Maximum value for the connection event interval. This shall be greater than or equal to Conn_Interval_Min. Range: 0x0006 to 0x0C80 Time = N * 1.25 msec Time Range: 7.5 msec to 4 seconds Conn_Latency 2 bytes Slave latency for the connection in number of connection events. Range: 0x0000 to 0x01F4 Supervision_Timeout 2 bytes Supervision timeout for the LE Link. Range: 0x000A to 0x0C80 Time = N * 10 msec Time Range: 100 msec to 32 seconds Conn_Len_Min 2 bytes Minimum length of connection event needed for the LE connection. Range: 0x0000 – 0xFFFF Time = N * 0.625 msec. Conn_Len_Max 2 bytes Maximum length of connection event needed for the LE connection. Range: 0x0000 – 0xFFFF Time = N * 0.625 msec. Num_WhiteList_Entri es 1 byte Number of devices that have to be added to the whitelist. Addr_Array N * 7 bytes The addr_array will contain Num_White_List_Entries number of addresses and their address types that have to be added into the whitelist. The format of the addr_array should be address type followed by address. Table 88. Aci_Gap_Start_Auto_Conn_Establishment return parameters Parameter Size Description Status 1 byte 0x00: BLE_STATUS_SUCCESS 0x12: BLE_STATUS_INVALID_PARAMETER 0x0C: ERR_COMMAND_DISALLOWED Table 87. Aci_Gap_Start_Auto_Conn_Establishment command parameters Parameter Size Description |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |