CDB5378 datasheet(10/72 Pages) CIRRUS

10 / 72 page

CDB5378

DS639DB3

CDB5378 as an unknown USB device.

• If prompted for a USB driver, skip to the next step. If not, using Windows Hardware Device Manager

go to the properties of the unknown USB API device and select “Update Driver”.

• Select “Install from a list or specific location”, then select “Include this location in the search” and then

browse to “C:\Program Files\Cirrus Seismic Evaluation\Driver\”. The PC will recognize and install the

USBXpress device driver.

• After driver installation, cycle power to CDB5378. The PC will automatically detect it and add it as a

USBXpress device in the Windows Hardware Device Manager.

An application note, AN271 - Cirrus Seismic Evaluation GUI Installation Guide, is available from the Cirrus

Logic web site with step-by-step instructions on installing the USBXpress driver.

1.3.4

Launching the Seismic Evaluation Software

Important: For reliable USB communication, the USBXpress driver must be installed after the Seismic

Evaluation Software installation but before launching the application. The USBXpress driver files are in-

cluded in a sub-folder as part of the installation.

To launch the Cirrus Seismic Evaluation Software, go to:

• Start

Programs

Cirrus Seismic Evaluation

or:

• C:\Program Files\Cirrus Seismic Evaluation\SeismicGUI.exe

For the most up-to-date information about the software, please refer to its help file:

• Within the software: Help

Contents

or:

•Start

Programs

Cirrus Seismic Evaluation

SEISMICGUI

or:

• C:\Program Files\Cirrus Seismic Evaluation\SEISMICGUI.HLP

CDB5378 Datasheet(PDF) 10 Page - Cirrus Logic