| Electronic Components Datasheet Search |
|
AT43USB325 Datasheet(PDF) 87 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
AT43USB325 Datasheet(HTML) 87 Page - ATMEL Corporation |
|
87 / 109 page ![]() 87 3355C–USB–4/05 AT43USB325 • Bit 2 – PSSTAT: Port Suspend Status 0 = Port not suspended 1 = Port suspended Set and cleared by the hardware as controlled through Port Control Register. • Bit 1 – PESTAT: Port Enable Status 0 = Port is disabled 1 = Port is enabled Set and cleared by the hardware as controlled through Port Control register. • Bit 0 – PCSTAT: Port Connect Status 0 = No device on this port 1 = Device present on this port Set to 1 for Port 1. Set and cleared by the hardware after sampling of connect status at EOF2. 8.4.4.2 Overcurrent Detect Register – UOVCER • Bit 7..3 – Reserved These bits are reserved in the AT43USB325 and will read as zero. •Bit 2 – OVC 2 Setting this bit enables the hub to detect an overcurrent on a port while the hub is in the suspend state. The overcurrent condition is signalled by a 1 to 0 transition at PD0. • Bit 1, 0 – Reserved These bits are reserved in the AT43USB325 and will read as zero. Bit 7 6 5 4 3 2 1 0 $1FF2 –– – – – OVC2 – – UOVCER Read/Write R R R R R R/W R R Initial Value 0 0 0 0 0 0 0 0 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |