MPC8280 datasheet(267/1386 Pages) FREESCALE

267 / 1386 page

60x Signals

MPC8280 PowerQUICC II Family Reference Manual, Rev. 1

Freescale Semiconductor

7-9

7.2.4.5

Caching-Inhibited (CI)—Output

The cache inhibit (CI) signal is an output signal on the MPC8280. Following are the state meaning and

timing comments for CI.

State Meaning

Asserted—Indicates that the transaction in progress should not be cached. CI

reflects the I bit (WIM bits) from the MMU except during certain transactions.

Negated—Indicates that the transaction should be cached.

Timing Comments

Assertion/Negation—Same as A[0–31].

High Impedance—Same as A[0–31].

7.2.4.6

Write-Through (WT)—Output

The write-through (WT) signal is an output signal on the MPC8280. Following are the state meaning and

timing comments for WT.

State Meaning

Asserted—Indicates that the transaction should operate in write-through mode.

WT reflects the W bit (WIM bits) from the MMU except during certain

transactions. WT may be asserted during read transactions.

Negated—Indicates that the transaction should not operate in write-through mode.

Timing Comments

Assertion/Negation—Same as A[0–31].

High Impedance—Same as A[0–31].

7.2.5

Address Transfer Termination Signals

The address transfer termination signals are used to indicate either that the address phase of the transaction

has completed successfully or must be repeated, and when it should be terminated. For detailed

information about how these signals interact, see Section 7.2.5, “Address Transfer Termination Signals.”

The address transfer termination signals have no meaning in internal only mode.

7.2.5.1

Address Acknowledge (AACK)

The address acknowledge (AACK) signal is an input/output on the MPC8280.

7.2.5.1.1

Address Acknowledge (AACK)—Output

.Following are the state meaning and timing comments for AACK as an output signal.

State Meaning

Asserted—Indicates that the address tenure of a transaction is terminated. On the

cycle following the assertion of AACK, the bus master releases the

address-tenure-related signals to the high-impedance state and samples ARTRY.

Negated—Indicates that the address bus and the transfer attributes must remain

driven, if negated during ABB.

Timing Comments

Assertion—Occurs a programmable number of clocks after TS or whenever

ARTRY conditions are resolved.

Negation—Occurs one clock after assertion.

MPC8280 Datasheet(PDF) 267 Page - Freescale Semiconductor, Inc

MPC8280 Datasheet(HTML) 267 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL