3

2

4

5

1

VI

GND

EN

SW

FB

TPS62200, TPS62201, TPS62202, TPS62203

TPS62204, TPS62205, TPS62207, TPS62208

www.ti.com

SLVS417F – MARCH 2002 – REVISED JUNE 2015

5 Pin Configuration and Functions

DBV Package

5-Pin SOT-23

Top View

Pin Functions

PIN

I/O

DESCRIPTION

NAME

NO.

This is the enable pin of the device. Pulling this pin to ground forces the device into shutdown mode. Pulling this

EN

3

I

pin to Vin enables the device. This pin must not be left floating and must be terminated.

This is the feedback pin of the device. Connect this pin directly to the output if the fixed output voltage version is

FB

4

I

used. For the adjustable version an external resistor divider is connected to this pin. The internal voltage divider

is disabled for the adjustable version.

GND

2

—

Ground

SW

5

I/O

Connect the inductor to this pin. This pin is the switch pin and is connected to the internal MOSFET switches.

VI

1

I

Supply voltage pin

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

(1)

MIN

MAX

UNIT

VI

Supply voltages(2)

–0.3

7.0

V

Voltages on pins SW, EN, FB (2)

–0.3

VCC +0.3

V

PD

Continuous power dissipation

See Thermal Information

TJ

Operating junction temperature

–40

150

°C

Tstg

Storage temperature

–65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended

Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values are with respect to network ground terminal.

6.2 ESD Ratings

VALUE

UNIT

Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V(ESD)

Electrostatic discharge

V

Charged device model (CDM), per JEDEC specification JESD22-

±500

C101(2)

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

Copyright © 2002–2015, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: TPS62200 TPS62201 TPS62202 TPS62203 TPS62204 TPS62205 TPS62207 TPS62208