DAC7750IPWPR.B datasheet(25/56 Pages) TI2

25 / 56 page

8.3.11 Programmable Slew Rate

The slew rate control feature controls the rate at which the output current changes. With the slew rate control

feature disabled, the output changes smoothly at a rate limited by the output drive circuitry and the attached

load.

To reduce the slew rate, enable the slew rate control feature through bit 4 of the Control Register. With this

feature enabled, the output does not slew directly between the two values. Instead, the output steps digitally at

a rate defined by bits [7:5] (SRSTEP) and bits [11:8] (SRCLK) of the Control Register. SRCLK defines the rate

at which the digital slew updates, and SRSTEP defines the amount by which the output value changes at each

update. If the DAC data register is read while the DAC output is still changing, the instantaneous value is read.

Table 8-3 lists the slew rate step-size options. Table 8-4 summarizes the slew rate update clock options.

Table 8-3. Slew Rate Step-Size (SRSTEP) Options

SRSTEP

STEP SIZE (LSB)

DAC7750

DAC8750

000

0.0625

001

0.125

010

0.25

011

0.5

100

101

110

111

128

Table 8-4. Slew Rate Update Clock (SRCLK) Options

SRCLK

DAC UPDATE FREQUENCY (Hz)

0000

258,065

0001

200,000

0010

153,845

0011

131,145

0100

115,940

0101

69,565

0110

37,560

0111

25,805

1000

20,150

1001

16,030

1010

10,295

1011

8,280

1100

6,900

1101

5,530

1110

4,240

1111

3,300

www.ti.com

DAC7750, DAC8750

SBAS538D – DECEMBER 2013 – REVISED DECEMBER 2021

Submit Document Feedback

Product Folder Links: DAC7750 DAC8750

DAC7750IPWPR.B Datasheet(PDF) 25 Page - Texas Instruments

DAC7750IPWPR.B Datasheet(HTML) 25 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

Datasheet Download

Link URL