ADMV4530 datasheet(17/64 Pages) AD

Part #	ADMV4530

Description	Dual-Mode, Ka Band Upconverter with Integrated Fractional-N PLL and VCO

PDF	64 Pages

Scroll/Zoom	100%

Manufacturer	AD [Analog Devices]

Direct Link	http://www.analog.com

Logo

17 / 64 page

Data Sheet

ADMV4530

TYPICAL PERFORMANCE CHARACTERISTICS

analog.com

Rev. C | 17 of 64

IF MODE

IF frequency = 2.7 GHz, IF power = −41 dBm, RF frequency = 29 GHz, 1 MHz tone spacing, upper sideband, R_WORD = 4, CP_CURRENT =

2.10 mA, REF_IN power = 8 dBm, REF_IN frequency = 200 MHz, loop filter bandwidth = 100 kHz, VCC_DRV = VCC_AMP = VCC2_DRV = 4

V, VCC_IF = VCC2_IF = VCC_VVA = VCC_MIXER = VCC_DOUBLER = VCC_VCO = VCC_DIV = VCC_LDO = VCC_CP = 3.3 V, VCC_1P8V

= 1.8 V, TA = +25°C, −40°C, and +85°C, VCTR_RF =1.8 V, VCTR_IF = 0 V, and board losses de-embedded to the device, unless otherwise

noted. Note that VCTR_IF is the voltage applied to the EXT_CAP_x pins.

Figure 34. Conversion Gain vs. RF Frequency over Temperature

Figure 35. Conversion Gain vs. Supply Voltage over Temperature

Figure 36. Output IP3 vs. RF Frequency over Temperature

Figure 37. Conversion Gain vs. IF Frequency over Temperature

ADMV4530 Datasheet(PDF) 17 Page - Analog Devices