| Electronic Components Datasheet Search |
|
MPC8610EC Datasheet(PDF) 49 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8610EC Datasheet(HTML) 49 Page - Freescale Semiconductor, Inc |
|
49 / 96 page ![]() Electrical Characteristics MPC8610 Integrated Host Processor Hardware Specifications, Rev. 0 Freescale Semiconductor 49 2.13.2 GTM AC Timing Specifications Table 40 provides the GTM input and output AC timing specifications. Figure 21 provides the AC test load for the GTM. Figure 21. GTM AC Test Load 2.14 GPIO This section describes the DC and AC electrical specifications for the GPIO of the MPC8610. 2.14.1 GPIO DC Electrical Characteristics Table 41 provides the DC electrical characteristics for the GPIO. Low-level output voltage (OVDD = min, IOL = 100 μA) VOL —0.2 V Note: 1. The symbol VIN, in this case, represents the OVIN symbol referenced in Table 2 and Table 3. Table 40. GTM Input and Output AC Timing Specification1 Characteristic Symbol2 Min Unit Notes GTM inputs—minimum pulse width tGTIWID 7.5 ns 3 GTM outputs—minimum pulse width tGTOWID 12 ns Notes: 1. Input specifications are measured from the 50 percent level of the signal to the 50 percent level of the rising edge of CLKIN. Timings are measured at the pin. 2. Timer inputs and outputs are asynchronous to any visible clock. Timer outputs should be synchronized before use by external synchronous logic. Timer inputs are required to be valid for at least tGTIWID ns to ensure proper operation. 3. The minimum pulse width is a function of the MPX/platform clock. The minimum pulse width must be greater than or equal to 4 times the MPX/platform clock period. Table 41. GPIO DC Electrical Characteristics Parameter Symbol Min Max Unit High-level input voltage VIH 2OVDD + 0.3 V Low-level input voltage VIL –0.3 0.8 V Input current (VIN 1 = 0 V or V IN = VDD)IIN —±5 μA High-level output voltage (OVDD = min, IOH = –100 μA) VOH OVDD – 0.2 — V Table 39. GTM DC Electrical Characteristics (continued) Parameter Symbol Min Max Unit Output Z0 = 50 Ω OVDD/2 RL = 50 Ω |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |