ADS6123IRHB25 datasheet(45/67 Pages) TI1

45 / 67 page

www.ti.com

Input Common-Mode

180

A x

125 MSPS

(1)

REFERENCE

VCM

REFM

REFP

INTREF

EXTREF

INTERNAL

REFERENCE

1kW

4kW

Internal Reference

External Reference

Full−scale differential input pp + (Voltage forced on VCM)

1.33

(2)

ADS6125, ADS6124

ADS6123, ADS6122

SLAS560A – OCTOBER 2007 – REVISED MARCH 2008

To ensure a low-noise common-mode reference, the VCM pin is filtered with a 0.1-

µF low-inductance capacitor

connected to ground. The VCM pin is designed to directly drive the ADC inputs. The input stage of the ADC

sinks a common-mode current in the order of 180

µA (at 125 MSPS). Equation 1 describes the dependency of

the common-mode current and the sampling frequency.

Equation 1 helps to design the output capability and impedance of the CM driving circuit.

ADS612X has built-in internal references REFP and REFM, requiring no external components. Design schemes

are used to linearize the converter load seen by the references; this and the integration of the requisite reference

capacitors on-chip eliminates the need for external decoupling. The full-scale input range of the converter is

controlled in the external reference mode as explained below. The internal or external reference modes can be

selected by programming the serial interface register bit <REF> (seeTable 5).

Figure 96. Reference Section

When the device is in internal reference mode, the REFP and REFM voltages are generated internally.

Common-mode voltage (1.5 V nominal) is output on VCM pin, which can be used to externally bias the analog

input pins.

When the device is in external reference mode, the VCM acts as a reference input pin. The voltage forced on the

VCM pin is buffered and gained by 1.33 internally, generating the REFP and REFM voltages. The differential

input voltage corresponding to full-scale is given by Equation 2.

In this mode, the 1.5 V common-mode voltage to bias the input pins has to be generated externally. There is no

change in performance compared to internal reference mode.

Submit Documentation Feedback

Product Folder Link(s): ADS6125, ADS6124 ADS6123, ADS6122

ADS6123IRHB25 Datasheet(PDF) 45 Page - Texas Instruments

ADS6123IRHB25 Datasheet(HTML) 45 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

Datasheet Download

Link URL