18

MACH211SP-10/12 (Ind)

Notes:

1. These parameters are not 100% tested, but are evaluated at initial characterization and at any time the design is modified

where capacitance may be affected.

2. See Switching Test Circuit for test conditions.

3. If a signal is powered-down, this parameter must be added to its respective high-speed parameter.

Setup Time from Input, I/O, or Feedback Through Transparent Input

Latch to Output Latch Gate

8.5

10.5

ns

Input Latch Gate to Output Latch Setup

11

13.5

ns

Input Latch Gate Width LOW

5

6

ns

Input, I/O, or Feedback to Output Through Transparent Input and

Output Latches

14

17

ns

Asynchronous Reset to Registered or Latched Output

15

19.5

ns

Asynchronous Reset Width (Note 1)

10

12

ns

Asynchronous Reset Recovery Time (Note 1)

10

10

ns

Asynchronous Preset to Registered or Latched Output

15

18

ns

Asynchronous Preset Width (Note 1)

10

12

ns

Asynchronous Preset Recovery Time (Note 1)

10

10

ns

Input, I/O, or Feedback to Output Enable (Note 1)

15

15

ns

Input, I/O, or Feedback to Output Disable (Note 1)

15

15

ns

10

10

ns

10

10

ns

0

0

ns

10

10

ns

SWITCHING CHARACTERISTICS over INDUSTRIAL operating ranges (Note 2) (continued)

Parameter

Symbol

Parameter Description

-10

-12

Unit

Min

Max

Min

Max