PIC16C641-04SLASHSP datasheet(74/136 Pages) MICROCHIP

74 / 136 page

PIC16C64X & PIC16C66X

DS30559A-page 74

10.1

Special Function Registers as

Source/Destination

The PIC16C64X & PIC16C66X’s orthogonal instruction

set allows read and write of all ﬁle registers, including

special function registers. There are some special situ-

ations the user should be aware of:

10.1.1

STATUS AS DESTINATION

If an instruction writes to STATUS, the Z, C, and DC bits

may be set or cleared as a result of the instruction and

overwrite the original data bits written. For example,

executing CLRF STATUS will clear register STATUS,

and then set the Z bit leaving 0000 0100b in the reg-

ister.

10.1.2

PCL AS SOURCE OR DESTINATION

Read, write or read-modify-write on PCL may have the

following results:

Read PC:

PCL

→ dest

Write PCL:

PCLATH

→ PCH;

8-bit destination value

→ PCL

Read-Modify-Write:

PCL

→ ALU operand

PCLATH

→ PCH;

8-bit result

→ PCL

Where PCH = program counter high byte (not an

addressable register), PCLATH = Program counter

high holding latch, dest = destination, WREG or f.

10.1.3

BIT MANIPULATION

All bit manipulation instructions are done by ﬁrst read-

ing the entire register, operating on the selected bit and

writing the result back (read-modify-write). The user

should keep this in mind when operating on special

function registers, such as ports.

PIC16C641-04/SP Datasheet(PDF) 74 Page - Microchip Technology

PIC16C641-04/SP Datasheet(HTML) 74 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL