 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
ST10F273Z4 Datasheet(PDF) 18 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST10F273Z4 Datasheet(HTML) 18 Page - STMicroelectronics |
|
|
18 / 188 page  Pin data ST10F273Z4 18/188 P4.0 –P4.7 85-92 I/O Port 4 is an 8-bit bidirectional I/O port. It is bit-wise programmable for input or output via direction bit. Programming an I/O pin as input forces the corresponding output driver to high impedance state. The input threshold is selectable (TTL or CMOS). Port 4.4, 4.5, 4.6 and 4.7 outputs can be configured as push-pull or open drain drivers. In case of an external bus configuration, Port 4 can be used to output the segment address lines: 85 O P4.0 A16 Segment address line 86 O P4.1 A17 Segment address line 87 O P4.2 A18 Segment address line 88 O P4.3 A19 Segment address line 89 O P4.4 A20 Segment address line I CAN2_RxD CAN2: receive data input I/O SCL I2C Interface: serial clock 90 O P4.5 A21 Segment address line I CAN1_RxD CAN1: receive data input I CAN2_RxD CAN2: receive data input 91 O P4.6 A22 Segment address line O CAN1_TxD CAN1: transmit data output O CAN2_TxD CAN2: transmit data output 92 O P4.7 A23 Most significant segment address line O CAN2_TxD CAN2: transmit data output I/O SDA I2C Interface: serial data RD 95 O External memory read strobe. RD is activated for every external instruction or data read access. WR/WRL 96 O External memory write strobe. In WR-mode this pin is activated for every external data write access. In WRL mode this pin is activated for low byte data write accesses on a 16-bit bus, and for every data write access on an 8-bit bus. See WRCFG in the SYSCON register for mode selection. READY/ READY 97 I Ready input. The active level is programmable. When the ready function is enabled, the selected inactive level at this pin, during an external memory access, will force the insertion of waitstate cycles until the pin returns to the selected active level. ALE 98 O Address latch enable output. In case of use of external addressing or of multiplexed mode, this signal is the latch command of the address lines. Table 2. Pin description (continued) Symbol Pin Type Function |
Similar Part No. - ST10F273Z4 |
|
Similar Description - ST10F273Z4 |
|
|
Link URL |
| Privacy Policy |
| ALLDATASHEET.NET |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
English ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
