SYNPWM datasheet(17/57 Pages) FEELING

17 / 57 page

FM8P73B

Web site: http://www.feeling-tech.com.tw

Rev1.0 Nov 20, 2013

P.17/FM8P73B

FEELING

TECHNOLOGY

2.1.9

INTEN (Interrupt Mask Register)

Address

Name

15h (r/w)

INTEN

GIE

ADCIE

PBIE

T3IE

T2IE

T1P1IE

Legend: - = unimplemented, read as ‘0’.

GIE : Global interrupt enable bit.

= 1, Enable all un-masked interrupts.

= 0, Disable all interrupts.

Note : When an interrupt event occurred with the GIE bit and its corresponding interrupt enable bits are set,

the GIE bit will be cleared by hardware to disable any further interrupts. The RETFIE instruction will

exit the interrupt routine and set the GIE bit to re-enable interrupt.

ADCIE : ADC conversion completed interrupt enable bit.

= 1, Enable interrupt.

= 0, Disable interrupt.

PBIE : PORTB interrupt enable

= 1, Enable interrupt.

= 0, Disable interrupt.

T3IE : Timer2 underflow interrupt enable bit.

= 1, Enable interrupt.

= 0, Disable interrupt.

T2IE : Timer2 underflow interrupt enable bit.

= 1, Enable interrupt.

= 0, Disable interrupt.

T1P1IE : Timer1 / PWM1 underflow interrupt enable bit.

= 1, Enable interrupt.

= 0, Disable interrupt.

SYNPWM Datasheet(PDF) 17 Page - Feeling Technology Corp.