| Electronic Components Datasheet Search |
|
MPC8280 Datasheet(PDF) 1113 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8280 Datasheet(HTML) 1113 Page - Freescale Semiconductor, Inc |
|
1113 / 1386 page ![]() ATM AAL2 MPC8280 PowerQUICC II Family Reference Manual, Rev. 1 Freescale Semiconductor 33-7 33.3.2.2 Fixed Priority In fixed priority mode (TCT[Fix]=1), the transmitter, with each new cell, starts with searching the highest priority queue and then moves on to the lower priority queues. The TCT[FirstQueue] points to the highest priority queue, as shown in Figure 33-5, and remains unchanged by the CP. Figure 33-5. Fixed Priority Mode The TCT[OneP] determines the number of packets that the transmitter attempts to take from each queue (see the explanation in round robin mode). The NextQueue field of the lowest priority TxQD should be cleared (null link), and TCT[MaxStep] should be programmed to the total number of TX queues in the channel. When the transmitter reaches the null link and the cell is still not complete, the transmitter checks the TIMER CU mode as described above for the round robin mode. 33.3.3 Partial Fill Mode (PFM) The partial fill mode (TCT[PFM]=1) allows the user to specify a partial fill threshold (TCT[PFT]), which limits the number of data octets sent with each ATM cell. Partial fill mode assures that packets are not split over two cells, unless the first packet of the cell is greater than 47 bytes. In partial fill mode, the transmitter starts by filling the ATM cell with the first packet. After the first packet, the CP determines if including the next packet in the cell would exceed the PFT limit. If so, the second packet is not inserted into the current cell, the unused payload is padded with zeros, and the cell is sent. If the second packet does not exceed PFT, the CP inserts it into the CPS-PDU and moves on to the third packet, and so on. By programming PFT = 1, the partial fill mode can also serve to assure that only one packet is sent per cell. FirstQueue TCT NextQueue TxQD NextQueue TxQD 0x0000 (null link) TxQD Fix=1 Highest priority queue Lowest priority queue |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |