MPC8280 datasheet(1258/1386 Pages) FREESCALE

1258 / 1386 page

Fast Ethernet Controller

MPC8280 PowerQUICC II Family Reference Manual, Rev. 1

36-24

Freescale Semiconductor

Table 36-10 describes Ethernet RxBD fields.

0123

456

789

Offset + 0

—

CMR

Offset + 2

Data Length

Offset + 4

Rx Data Buffer Pointer

Offset + 6

Figure 36-9. Fast Ethernet Receive Buffer (RxBD)

Table 36-10. RxBD Field Descriptions

Bits

Name

Description

Empty

0 The buffer associated with this RxBD is full or reception terminated due to an error. The core can

examine or read to any fields of this RxBD. The CP does not use this BD as long as E = 0.

1 The associated buffer is empty. The RxBD and buffer are owned by the CP. Once E = 1, the core

should not write any fields of this RxBD.

—

Reserved, should be cleared.

Wrap (final BD in RxBD table)

0 Not the last BD in the table.

1 Last BD in the table. After this buffer is used, the CP receives incoming data into the first BD that

RBASE points to in the table. The number of RxBDs in this table is programmable and determined

only by the W bit.

The RxBD table must contain more than one BD in Ethernet mode.

Interrupt

0 No interrupt is generated after this buffer is used; FCCE[RXF] is unaffected.

1 FCCE[RXB] or FCCE[RXF] are set when this buffer is used by the Ethernet controller. These two

bits can cause interrupts if they are enabled.

Last in frame. Set by the Ethernet controller when this buffer is the last in a frame. This implies the

end of the frame or a reception error, in which case one or more of the CL, OV, CR, SH, NO, and LG

bits are set. The Ethernet controller writes the number of frame octets to the data length field.

0 Not the last buffer in a frame.

1 Last buffer in a frame.

First in frame. Set by the Ethernet controller when this buffer is the first in a frame.

0 Not the first buffer in a frame.

1 First buffer in a frame.

CMR

CAM match result for the frame. Set by the Ethernet controller when using a CAM for address

matching and FPSMR[ECM] = 1. Valid only if the L bit is set.

0 A hit in the CAM.

1 A miss in the CAM.

Miss. Set by the Ethernet controller for frames that are accepted in promiscuous mode, but are

flagged as a miss by the internal address recognition. Thus, while using promiscuous mode, the

user uses the miss bit to determine quickly whether the frame is destined for this station. Valid only

if RxBD[I] is set.

0 The frame is received because the address is recognized.

1 The frame is received because of promiscuous mode (address is not recognized).

MPC8280 Datasheet(PDF) 1258 Page - Freescale Semiconductor, Inc

MPC8280 Datasheet(HTML) 1258 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL