DSPIC33FJ06GS201TESLASHMM datasheet(274/346 Pages) MICROCHIP

274 / 346 page

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

DS70318D-page 272

Preliminary

Most instructions are a single word. Certain

double-word instructions are designed to provide all the

required information in these 48 bits. In the second

word, the 8 MSbs are ‘0’s. If this second word is

executed as an instruction (by itself), it will execute as

a NOP.

The double-word instructions execute in two instruction

cycles.

Most single-word instructions are executed in a single

instruction cycle, unless a conditional test is true, or the

program counter is changed as a result of the

instruction. In these cases, the execution takes two

instruction cycles with the additional instruction cycle(s)

executed as a NOP. Notable exceptions are the BRA

(unconditional/computed branch), indirect CALL/GOTO,

all table reads and writes and RETURN/RETFIE

instructions, which are single-word instructions but take

two or three cycles. Certain instructions that involve

skipping over the subsequent instruction require either

two or three cycles if the skip is performed, depending

on whether the instruction being skipped is a single-word

or two-word instruction. Moreover, double-word moves

require two cycles.

Note:

For more details on the instruction set,

refer to the “dsPIC30F/33F Programmer’s

Reference Manual”

(DS70157).

TABLE 22-1:

SYMBOLS USED IN OPCODE DESCRIPTIONS

Field

Description

#text

Means literal defined by “text”

(text)

Means “content of text”

[text]

Means “the location addressed by text”

{ }

Optional field or operation

<n:m>

Byte mode selection

Double-Word mode selection

Shadow register select

Word mode selection (default)

Acc

One of two accumulators {A, B}

AWB

Accumulator Write-Back Destination Address register

∈ {W13, [W13]+ = 2}

bit4

4-bit bit selection field (used in word-addressed instructions)

∈ {0...15}

C, DC, N, OV, Z

MCU Status bits: Carry, Digit Carry, Negative, Overflow, Sticky Zero

Expr

Absolute address, label or expression (resolved by the linker)

File register address

∈ {0x0000...0x1FFF}

lit1

1-bit unsigned literal

∈ {0,1}

lit4

4-bit unsigned literal

∈ {0...15}

lit5

5-bit unsigned literal

∈ {0...31}

lit8

8-bit unsigned literal

∈ {0...255}

lit10

10-bit unsigned literal

∈ {0...255} for Byte mode, {0:1023} for Word mode

lit14

14-bit unsigned literal

∈ {0...16384}

lit16

16-bit unsigned literal

∈ {0...65535}

lit23

23-bit unsigned literal

∈ {0...8388608}; LSb must be ‘0’

None

Field does not require an entry, can be blank

OA, OB, SA, SB

DSP Status bits: ACCA Overflow, ACCB Overflow, ACCA Saturate, ACCB Saturate

Program Counter

Slit10

10-bit signed literal

∈ {-512...511}

Slit16

16-bit signed literal

∈ {-32768...32767}

Slit6

6-bit signed literal

∈ {-16...16}

Base W register

∈ {W0..W15}

Destination W register

∈ { Wd, [Wd], [Wd++], [Wd--], [++Wd], [--Wd] }

Wdo

Destination W register

∈

{ Wnd, [Wnd], [Wnd++], [Wnd--], [++Wnd], [--Wnd], [Wnd+Wb] }

Wm,Wn

Dividend, Divisor Working register pair (Direct Addressing)

DSPIC33FJ06GS201TE/MM Datasheet(PDF) 274 Page - Microchip Technology

DSPIC33FJ06GS201TE/MM Datasheet(HTML) 274 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL