STM8S005C6T6 datasheet(91/103 Pages) STMICROELECTRONICS

91 / 103 page

(1)

Data obtained with HSI clock configuration, after applying HW recommendations described in AN2860 (EMC

guidelines for STM8S microcontrollers).

Electromagnetic interference (EMI)

9.3.12.3

Emission tests conform to the IEC61967-2 standard for test software, board layout and pin

Table 47: EMI data

Unit

Conditions

Parameter

Symbol

Max fHSE/fCPU

(1)

Monitored

frequency

band

General

conditions

8 MHz/ 16

MHz

8 MHz/ 8

MHz

dBµV

0.1 MHz to

30 MHz

VDD = 5 V,

TA = +25 °C,

Peak level

SEMI

30 MHz to

130 MHz

LQFP48

package

conforming to

IEC61967-2

-4.0

130 MHz to 1

GHz

—

1.5

2.0

SAE EMI

level

(1) Data based on characterization results, not tested in production.

Absolute maximum ratings (electrical sensitivity)

9.3.12.4

Based on two different tests (ESD and LU) using specific measurement methods, the product

is stressed in order to determine its performance in terms of electrical sensitivity. For more

details, refer to the application note AN1181.

Electrostatic discharge (ESD)

9.3.12.5

Electrostatic discharges (3 positive then 3 negative pulses separated by 1 second) are applied

to the pins of each sample according to each pin combination. The sample size depends on

the number of supply pins in the device (3 parts*(n+1) supply pin). This test conforms to the

JESD22-A114A/A115A standard. For more details, refer to the application note AN1181.

91/103

DocID022186 Rev 3

Electrical characteristics

STM8S005K6 STM8S005C6

STM8S005C6T6 Datasheet(PDF) 91 Page - STMicroelectronics

STM8S005C6T6 Datasheet(HTML) 91 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL